Subsector · NAICS 332 · Industry guide
CPA Salary in Fabricated metal mfg.
What accountants and auditors actually earn working in Fabricated Metal Product Manufacturing — the full percentile range, employment, pay by role, and how the industry ranks against every other.
Median CPA pay · Fabricated metal mfg.
$83,630
Midpoint for accountants & auditors
Typical range
$67.5K–$105.2K
Middle 50% (25th–75th percentile)
Top earners
$133.8K+
90th percentile and above
vs. national
-0.1%
Ranks #24 of 52 industries
Direct BLS OEWS May 2025 measurement · Accountants & Auditors (SOC 13-2011) in NAICS 332 · reviewed June 2026
How much do accountants make in Fabricated metal mfg.?
A direct BLS OEWS May 2025 measurement of national wages for accountants and auditors employed in this industry — verified, not modeled.
vs. all industries
-0.1%
Fabricated metal mfg. ranks #24 of 52 published industry cuts, and #15 of 32 subsectors.
See the rankingLicensed CPA · modeled
$93,700
A modeled ~12% license premium on this industry's verified median. BLS does not measure CPA pay separately.
What the license is worthTop earners · 90th pct
$133.8K+
A 2.4× spread from the 10th percentile — model your own number by role and experience.
Model your payFabricated metal mfg. · Accountants & auditors
Verified$40.21/hr median hourly · $91,040 average
Percentiles in Fabricated metal mfg.
Verified| Percentile | Annual | Hourly | What it means |
|---|---|---|---|
| 10th percentile | $56,450 | $27.14/hr | Entry-level / lower pay |
| 25th percentile | $67,480 | $32.44/hr | Below median |
| Median (50th) | $83,630 | $40.21/hr | Typical pay |
| 75th percentile | $105,160 | $50.56/hr | Experienced / senior |
| 90th percentile | $133,810 | $64.33/hr | Top earners |
Annual and hourly wages for accountants and auditors employed in Fabricated Metal Product Manufacturing, BLS OEWS May 2025. BLS measures 11,090 accountants and auditors in this industry. Hourly figures outside the median are derived from annual wages at 2,080 hours.
Why it pays this
What drives accountant pay in Fabricated metal mfg.
Fabricated metal mfg. runs -0.1% versus the all-industry median. Here is what sits behind that number.
Fabricated metal mfg. · NAICS 332
Fabricated Metal Product Manufacturing ranks #24 of 52 published industry cuts for accountant pay and sits essentially level with the national median. BLS measures 11,090 accountants and auditors working in it. It is a NAICS subsector, a narrower cut that sits inside a broader sector, so it reflects a more specific set of employers. This is a direct BLS wage measurement for accountants and auditors working in the industry — not an estimate scaled from the national figure.
The technical work the industry demands
Industries that need specialized accounting — revenue recognition, regulatory reporting, cost accounting, fund and partnership work — pay for skills that are hard to hire and slow to build.
Where the employers are
Industry pay and location are entangled: an industry clustered in expensive metros carries a higher median partly for that reason alone. Compare against the state and metro guides to separate the two.
The mix of roles
This median blends every accounting job in the industry, from staff to controller. An industry with a more senior mix posts a higher median without paying any individual more.
What the figure excludes
OEWS wages cover base and some incentive pay. Equity, deferred compensation, and profit-sharing are not well captured — which understates total pay most in bonus-heavy industries.
Comparison
Fabricated metal mfg. vs. the national benchmark
Where this industry sits against all industries combined, and against the broader Manufacturing sector it belongs to.
Fabricated metal mfg. — all accountants
verified BLS measurement
$83,630
-0.1%Manufacturing — parent sector
verified BLS measurement
$87,790
+4.9%Fabricated metal mfg. — licensed CPA
modeled ~12% license premium
$93,700
+12.0%All industries — national
verified benchmark
$83,680
base
Fabricated metal mfg. runs -0.1% versus the national median for accountants and auditors. Industry and national figures are direct BLS OEWS May 2025 measurements; the licensed-CPA figure is a modeled estimate layered on top.
By role
Accounting roles in Fabricated metal mfg.
Median estimates by role, scaled to this industry's verified wage level. BLS does not publish pay by role, so these are modeled estimates — the industry median they are built on is verified.
Estimated median pay by role
Scaled to Fabricated metal mfg., estimated pay runs from $118,800 (Accounting Manager) to $326,200 (Chief Financial Officer) — about 2.7× across the ladder.
| Role / level | Low | Est. median | High |
|---|---|---|---|
| Chief Financial Officer | $326,200 | ||
| Partner | $301,100 | ||
| Director of Finance | $204,900 | ||
| Senior Manager | $171,400 | ||
| Controller | $163,100 | ||
| Tax Manager | $129,600 | ||
| Audit Manager | $129,600 | ||
| Accounting Manager | $118,800 | ||
| Audit Senior | $92,000 | ||
| Tax Senior | $90,300 | ||
| Senior Accountant | $85,300 | ||
| Audit Associate | $69,400 | ||
| Tax Associate | $68,600 | ||
| Staff Accountant | $65,200 |
Role multipliers applied to the BLS national median for Accountants & Auditors. The low–high band is a modeled typical range, not a guaranteed offer.
Frequently asked questions
- How much do accountants make in Fabricated metal mfg.?
- The median wage for accountants and auditors in Fabricated Metal Product Manufacturing is $83,630 per year ($40.21/hr) — -0.1% versus the national median of $83,680 across all industries. The middle half earn between $67,480 and $105,160. This is a direct BLS OEWS May 2025 measurement.
- Do CPAs earn more than this in Fabricated metal mfg.?
- Typically yes, but BLS does not measure it. The $83,630 figure covers all accountants and auditors in the industry — licensed CPAs and unlicensed staff together. BLS publishes no CPA-specific wage for any industry. Applying our modeled ~12% license premium to this industry's median gives roughly $93,700, which is an estimate, not a measurement.
- Is Fabricated metal mfg. a good industry for accountants?
- It ranks #24 of 52 published industry cuts by median pay, and #15 of 32 subsectors. BLS measures 11,090 accountants and auditors working in it, so weigh pay against how many roles actually exist, where they are located, and how specialized the work is.
- What do top earners make in Fabricated metal mfg.?
- The 90th percentile is $133,810 and the 10th percentile is $56,450 — a 2.4× spread, versus 2.6× nationally. Top earners are generally senior, licensed, and in the industry's higher-cost metros.
- How does Fabricated metal mfg. compare to Manufacturing overall?
- Fabricated Metal Product Manufacturing is a NAICS subsector inside Manufacturing, and it pays -4.7% versus that broader sector's median of $87,790. Because the subsector sits inside the sector, its accountants are counted in both figures.
- Are these figures verified or estimated?
- The industry wage figures on this page are verified: they are direct BLS OEWS May 2025 measurements of what accountants and auditors earn within Fabricated Metal Product Manufacturing, nationally. The role-level and CPA-license figures are clearly labeled estimates — modeled by applying documented multipliers to that verified median, because BLS does not publish pay by role or license.
How to read these numbers
National, state, and metro pay comes straight from the federal wage measurement for accountants & auditors — direct and source-backed, not scaled from anything.
Role, experience, CPA-license, and employer figures are modeled on top of that measurement and labeled Estimate — the federal data does not break those out, so we never present them as measurements.
Add your Fabricated metal mfg. salary
BLS measures the occupation, not the license. Anonymous submissions are how we build a real CPA-specific picture on top of it — it takes two minutes.